You're Not Buying a Bottle. You're Buying Up to 33 Litres of Performance.
Up to 33L from 1L • From just $9/L when diluted
◾️ The only Permanon sealant purpose-built to protect matte finishes without adding gloss
◾️ Environmentally friendly, aqueous silicium formula — recommended by SkinzWraps
◾️ Bonds by electrostatic adhesion — no chemical reaction with wraps, film, or matte lacquer
◾️ Adds UVA/UVB protection and hardness level 8, with zero shine trade-off
◾️ No buffing, no polishing — apply, wipe, and protection is instantly active
◾️ Cuts follow-up cleaning by up to 80% on matte-wrapped cars, rally vehicles, and equipment
◾️ Doubles as the finishing sealant for camouflage vehicles, furniture, and sports gear
Surfaces Protected in One Application
Automotive — Matte Finishes
• Matte vinyl wrap — all colours and finishes
• Matte paint and lacquer foil
• Matte dip lacquer surfaces
• Matte plastic-coated panels and bumpers
• Carbon fibre with matte finish
Motorsport & Specialty Vehicles
• Rally cars and show vehicles with matte liveries
• Camouflage and military-finish vehicles
• Track and performance vehicles with matte wraps
Sport, Leisure & Furniture
• Sports and leisure equipment with matte finishes
• Indoor and outdoor furniture with matte coatings
• Any hard surface requiring matte-safe protection
What it Protects Against
• UVA and UVB radiation — slowing matte colour fade under Australian sun conditions
• Surface hardening and micro-abrasion — hardness protection degree 8
• Bird droppings, insect acids, and organic contamination
• Road grime, brake dust, and road salt adhesion
• Environmental fallout and airborne contamination
• Water and moisture ingress — hydrophobic water beading without pore sealing
Performance and Formula Profile
• Contains only monomeric silicium on an aqueous basis — no silicone oils, no fluorosilanes, no polymers, no solvents
• Zero gloss enhancement — the matte surface finish is preserved exactly as it was applied
• Electrostatic adhesion — no chemical bond with coatings or plastic film
• UVA and UVB protection — shields matte pigment from sun degradation
• Hardness protection at degree 8 — surface resistance against everyday marking
• Less than 0.2 gloss unit change across all 3M matte vinyl films tested (60° irradiation angle)
• 80%+ easier follow-up cleaning after every maintenance wash
• PFAS-free and environmentally friendly
• Recommended by SkinzWraps for matte-wrapped vehicles
Independent Gloss-Level Measurement — 3M Matte Films
The following test data confirms that Permanon Super Matte causes effectively zero gloss change on professionally produced matte vinyl film. Testing was conducted using a 60° irradiation angle, consistent with the average angle of incidence of sunlight.
|
Surface
|
Film / Material
|
Gloss Before Treatment
|
Gloss After Treatment
|
Change
|
|
3M Matte Film
|
Matt-white 1080 / M10
|
5.7%
|
5.8%
|
+0.1%
|
|
3M Matte Film
|
Matt-black 1080 / M12
|
4.4%
|
4.5%
|
+0.1%
|
|
3M Matte Film
|
Matt-silver 1080 / M21
|
4.7%
|
4.9%
|
+0.2%
|
|
3M Matte Film
|
Matt-military green 1080/M26
|
3.8%
|
4.0%
|
+0.2%
|
|
Carbon Fibre
|
Matt-black 1080 / CF12
|
7.9%
|
8.4%
|
+0.5%
|
|
Carbon Fibre
|
Matt-anthracite 1080 / CF21
|
9.2%
|
9.5%
|
+0.3%
|
Test methodology: 60° irradiation angle on 3M 1080-series matte film and carbon fibre wrap materials. Maximum gloss change observed across all surfaces: +0.5 gloss units — imperceptible to the human eye.
Dilution Ratio and Application
Permanon Super Matte is a professional-grade concentrate that mixes with regular tap water in minutes. No specialist equipment required. The mixed solution remains stable for approximately 3 weeks.
Dilution:
• First-time application: First-time application: mix Permanon Super Matte at 2–5% with water. A 1-litre concentrate makes 20–50 litres of diluted solution depending on concentration. A 500ml concentrate makes 10–25 litres.
• For maintenance: For maintenance top-ups, a 2–3% solution is sufficient. A 1-litre concentrate makes 33–50 litres. A 500ml concentrate makes 16–25 litres.
|
Dilution
|
Mix Ratio
|
1L Concentrate Makes
|
500ml Concentrate Makes
|
Best For
|
|
5%
|
1:20
|
20 litres
|
10 litres
|
First-time application on new or untreated matte surfaces
|
|
3%
|
1:33
|
33 litres
|
16 litres
|
Standard first-time application
|
|
2%
|
1:50
|
50 litres
|
25 litres
|
Maintenance and shine-renewing top-up
|
Important Notes:
• Diluting with regular tap water allows the mixed solution to remain stable for approximately 3 weeks.
• Diluting with osmosis (purified) water extends shelf life to up to 3 months.
• A 1-litre concentrate produces up to 50 litres of ready-to-use solution at 2%.
Application Instructions:
1. Ensure the matte surface is clean and thoroughly degreased before applying. Use Permanon Matt Shampoo 2-in-1 for the pre-clean for best results.
2. Dab or spray the Super Matte solution directly onto the matte surface. Work panel by panel.
3. Remove any excess product with a clean, soft microfibre cloth. No buffing, no polishing, no reaction time required.
4. Rinse or leave to dry. Protection is immediately active.
|
For ongoing matte surface care: pair Super Matte with Permanon Matt Shampoo 2-in-1 — a dedicated matte wash that cleans with the same protective coating properties as Super Matte in a single step, so your matte finish is maintained at every wash without a separate sealing application.
|
Australia and New Zealand Distribution and Trade Pricing
Permanon Super Matte is available now across Australia and New Zealand through Permanon Australia in 100ml and 500ml concentrate formats. Trade pricing is available for wrap studios, automotive detailing businesses, and trade partners.
Contact the Permanon Australia team to discuss trade accounts, volume pricing, and product support. Get in Touch Now!
30-day return is to be approved or changed into "return policies"
