This modern surface protection leaves vehicles or equipment looking dull or matt and non-reflecting.
A few decades ago the matte surface finish was discovered as a stylistic element and it is becoming increasingly popular.
Our surface protection guarantees easy application and is an environmentally friendly and value-maintaining sealing for all matt coated, matt plastic coated and matt dip-lacquered surfaces.
A sealing of surface pores is not possible with this product! Permanon Matt contains only monomeric silicium on an aqueous basis.
The products of other manufacturers often contain silicone oils or fluor silane, in connection with polymers and/or solvents
Application Information
Products: Gloss-level measurement
| 3 M – Matte films | Before | After |
| matt-white 1080 / M10 | 5,7 % | 5,8 % |
| matt-black 1080 / M12 | 4,4 % | 4,5 % |
| matt-silver 1080 / M21 | 4,7 % | 4,9 % |
| matt-military green 1080/ M26 | 3,8 % | 4,0 % |
| Carbon Fiber | ||
| matt-black 1080 / CF12 | 7,9 % | 8,4 % |
| matt-anthracite 1080 / CF21 | 9,2 % | 9,5 % |
+ light irradiation angle of 60°
+ the test was done with mat film 3M and on carbon fiber
+ an irradiation angle of 60° was chosen for sunlight, as this coincides with the average angle of incidence of the sun
Method of Applications:
- Mix Permanon Matt 5% with water
- Mist onto a pre-cleaned and rinsed surface
- Rinse and wipe dry
Dosage:
• Dilute at 5%
Attention:
• Once prepared the solution should be used within 3 weeks
Related products
Auto
