Silver Line PSI+14 Specialised Surface Sealant Concentrate

Silver Line seals through electrostatic adhesion and Van der Waals interactions rather than chemical bonding. Perfect for vinyl-wrapped vehicles, aircraft exteriors, gloss and satin finishes, fibreglass boat hulls, and composite panels.  A 1-litre bottle makes 20 litres at 5% dilution or 33 litres at 3% lasts up to 6-8 months of surface protection. 

Because PSI+14 Silver Line makes every future clean more than 80% easier, it doesn’t just protect your surfaces — it gives back the time you spend maintaining them, wash after wash, for up to 6–8 months per application.

Also available in a Ready-to-Use Solution — Click to Shop RTU

Surfaces and Protection Coverage

Silver Line seals and protects without altering any surface it touches. Silicone-based products degrade vinyl film over time, cause edge lifting, and void wrap warranties — Silver Line contains no silicone, no solvents, and no waxes, making it completely safe on every surface type from painted automotive panels and aircraft fuselage to marine gelcoat, rubbers, metals, and hard plastics. One concentrate. Every hard surface. No masking, no product-switching, no compromise.

Surfaces Protected in One Application

Automotive — Including Vinyl Wraps and PPF

•       Gloss and satin vinyl-wrapped vehicles — 100% silicone-free and wrap-safe

•       Paint Protection Film (PPF) — bonds without reacting with the film structure

•       Factory-painted panels and clearcoat

•       Alloy wheels, rims, and chrome detailing

•       Plastic trim, bumpers, and exterior panels

•       Rubber seals, door surrounds, and weather strips

Aviation

•       Aircraft fuselage and painted exterior panels

•       Wing surfaces and leading edge protection

•       Composite and carbon fibre surfaces

•       Aluminium and anodised metal panels

•       Aviation gelcoat and primer surfaces

Marine

•       Boat and yacht hulls — GFK / fibreglass gelcoat

•       Marine painted topsides and deck surfaces

•       Stainless steel fittings, rails, and deck hardware

•       Fibreglass and composite marine surfaces

•       Antifouling topcoat surfaces

General Hard Surfaces

•       Painted varnished wood and hard-coated surfaces

•       GFK rubber and plastic covers

•       Industrial metals, alloys, and frameworks

•       Powder-coated surfaces

•       Hard plastics, hard synthetic fibres, and synthetic panels

Home, Facility & Institutional

•       Private households — benchtops, appliances, outdoor surfaces

•       Schools, government buildings, and public facilities

•       Restaurants, hotel kitchens, and hospitality surfaces

•       Surgical instrument surfaces

•       Machine and vehicle maintenance environments

•       Sweet and salt water vessels

•       Fitness equipment and gym machinery

What it Protects Against

•       Bird droppings and insect acids

•       Brake dust, road tar, and tyre residue

•       Resin, tree sap, and fuel deposits

•       Combustion residues, soot, and exhaust staining

•       Oil, grease, and fat incrustations

•       Road salt and marine salt air

•       UV radiation and sun bleaching

•       Environmental fallout and industrial contamination

Performance Resistance

•       Temperature resistant from -40°C to +300°C

•       UV resistant — preserves surface colour and integrity under direct sunlight

•       Resistant to acids and alkalis from pH 1–10

Dilution Ratio and Application

PSI+14 Silver Line is a professional-grade concentrate that mixes with regular tap water in minutes. No specialist equipment, no professional application required. The mixed solution remains active and ready to use for the periods shown below.

Dilution:

•       First-time application: First-time application: mix Permanon PSI+14 Silver Line at 5% with water. A 1-litre concentrate makes 20 litres of diluted solution. A 500ml concentrate makes 10 litres of diluted solution.

•       For maintenance: For shine-renewing maintenance, a 3% solution is sufficient. A 1-litre concentrate makes 33 litres of diluted solution. A 500ml concentrate makes 16 litres of diluted solution.

Important Notes:

•       Diluting with regular tap water allows the mixed solution to remain stable for approximately 3 weeks.

•       Diluting with osmosis (purified) water significantly extends shelf life — the mixed solution will remain stable for up to 3 months.

Application Instructions:

Before application, thoroughly clean the surface and ensure it is free of grease and heavy contamination. For vehicles and aircraft, complete your standard wash or approved pre-treatment first.

Apply or spray the solution directly onto the surface to be protected. No reaction time is required. No rubbing, buffing, or polishing is necessary — simply apply, remove any excess with a clean, soft microfibre cloth, and the protection is immediately active. For vinyl wraps and aircraft surfaces, allow to air dry or use a dry microfibre to avoid surface pressure.

Reapply every 6–8 months for continuous protection. Aircraft and marine surfaces exposed to high UV, salt, and environmental stress benefit from more frequent application.

Product Depth

Permanon PSI+14 Silver Line is a high-concentration Si14 silicium (silicon dioxide, SiO₂) nanotechnology sealant developed and manufactured in Germany. Unlike silicone-based or wax-based products that coat the surface and degrade over time, Silver Line works through electrostatic adhesion and van der Waals interactions — a molecular-level bond that forms without any chemical reaction with the surface material. This chemistry-neutral adhesion is precisely what makes Silver Line the specialist choice for sensitive surfaces: vinyl wraps, PPF, and aviation exteriors cannot tolerate silicone-based products, which degrade film structures, cause edge lifting, and void manufacturer warranties. Silver Line contains no silicone, no solvents, and no waxes, making it safe on all of these demanding surfaces while delivering the same high-concentration nano protection it provides across every other surface type it touches.

PSI+14 Silver Line is completely PFAS-free — zero forever chemicals — and biodegradable, making it one of the most eco-responsible specialist surface sealants available in Australia. Safe for users, treated surfaces, and the environment. Because the Si14 sealant creates a hydrophobic barrier that contamination cannot easily bond to, every follow-up clean becomes more than 80% easier across every surface treated, for up to 6–8 months per application. Whether you’re a wrap studio protecting client vehicles, a detailer servicing aircraft on the apron, a fleet operator maintaining wrapped commercial vehicles, a boat owner caring for a gelcoat hull, or a homeowner protecting multiple surfaces, PSI+14 Silver Line delivers specialist nano protection at professional-grade economy — up to 33 litres of ready-to-use solution from a single 1-litre concentrate.

Australia and New Zealand Distribution and Trade Pricing

Permanon PSI+14 Silver Line is available now across Australia and New Zealand through Permanon Australia. Trade pricing is available for wrap studios, detailing businesses, aviation service providers, marine operators, fleet operators, and trade partners.

Contact the Permanon Australia team to discuss trade accounts, volume pricing, and product support. Get in Touch Now!

30-day return is to be approved or changed into "return policies"