Oil. Grease. Algae. Diesel residue. Gone! Permanon Hecta is a highly concentrated, alkaline power cleaner formulated to cut through stubborn grime in a single pass.1L makes 33L at 3% dilution and treats up to 530m². It strips the organic film that bacteria thrive on, so your surface seal performs at its best.
Surfaces and Cleaning Coverage
Developed to break down contamination that everyday cleaning products cannot penetrate — oil, grease, fuel residue, diesel and heating oil contamination, moss and algae, and any kind of fat or oil build-up.
And because Hecta is the recommended pre-clean step before applying Permanon’s surface sealants, it plays a direct role in setting up the hydrophobic, germ-resistant surface protection examined in independent research on Permanon's nano coating technology.
Surfaces and Industries Hecta is Used On
Automotive & Mechanical
• Engine bays, transmissions, and cylinder banks
• Mechanical equipment and workshop machinery
• Petrol stations and engine washing facilities
• Fleet and vehicle maintenance areas
Marine
• Boat and yacht hulls — algae and moss removal
• Engine compartments and bilges
• Marina facilities and slipways
• Deck and topside surfaces with oil or fuel contamination
Hospitality & Commercial Kitchens
• Commercial kitchen surfaces, extraction systems, and floors
• Restaurant and hotel surfaces soiled with fats and oils
• Facility management and building maintenance
Industrial & Pre-Clean Applications
• Spray systems and high-pressure cleaning systems
• Industrial and trade applications across multiple sectors
• Widely used in solar panel cleaning to remove lichens, grease, bird droppings, and other environmental contaminants that can reduce panel efficiency, helping restore optimal performance while simplifying ongoing maintenance
• Surface pre-cleaning before applying Permanon Sanides, Silver Line, Gold Line, Profi Line Plus surface protections
What it Removes
• Oil and grease build-up
• Waste oil incrustations
• Fuel and fuel residue contamination
• Diesel and heating oil contamination
• Moss and algae
• Any kind of fats and oils, including commercial kitchen grease
Performance and Environmental Profile
• Highly concentrated alkaline formula — effective where standard cleaners fail
• Biodegradable to OECD standards
• Phosphate-free and solvent-free
• 1 litre concentrate at 5% dilution treats up to 530m²
• Suitable for use in spray systems and high-pressure cleaning equipment
• Recommended first step in Permanon's clean-and-seal hygiene system
Dilution Ratio and Application
Permanon Hecta is a professional-grade concentrate that mixes with regular tap water in minutes. Dilution rate depends on the severity of contamination.
Dilution:
• For stubborn contamination: For stubborn contamination: mix Permanon Hecta at 5% with water. A 1-litre concentrate makes 20 litres of diluted solution. A 500ml concentrate makes 10 litres of diluted solution.
• For general cleaning: For general degreasing and maintenance, a 3% solution is sufficient. A 1-litre concentrate makes 33 litres of diluted solution. A 500ml concentrate makes 16 litres of diluted solution.
• For large areas: For light surface cleaning or large-area application, a 2% solution can be used. A 1-litre concentrate makes up to 50 litres of diluted solution.
|
Dilution
|
Mix Ratio
|
1L Concentrate Makes
|
500ml Concentrate Makes
|
Best For
|
|
5%
|
1:20
|
20 litres
|
10 litres
|
Stubborn contamination — oil, grease, fuel, diesel, algae
|
|
3%
|
1:33
|
33 litres
|
16 litres
|
General degreasing and regular maintenance cleaning
|
|
2%
|
1:50
|
50 litres
|
25 litres
|
Light surface cleaning and large-area applications
|
Important Notes:
• Vary the dilution ratio according to the severity of contamination — use up to 10% for the most extreme build-up.
• Do not apply in direct sunlight.
Application Instructions:
1. Mix Permanon Hecta to the appropriate dilution for the level of contamination (see guide above).
2. Apply or mist the solution onto the surface to be cleaned, ensuring full coverage of the contaminated area.
3. For heavy contamination, allow the product to soak for a few minutes before agitating with a sponge, cloth, or soft brush.
4. Rinse with clean water, or wipe excess product off with a water-damp cloth directly after application.
|
Pro tip: For best results before applying a Permanon surface sealant (Silver Line, Gold Line, Profi-Line Plus, or Diamond), use Hecta as your pre-clean step. A genuinely degreased, contamination-free surface allows the sealant to bond more effectively and supports the hydrophobic, germ-resistant protection demonstrated in independent surface coating research.
|
Note: Permanon Hecta is a heavy-duty degreasing cleaner, not a surface sealant. For ongoing surface protection after cleaning, use Permanon Silver Line, Gold Line, Profi-Line Plus, or Diamond depending on the surface type.
Product Depth
Permanon Hecta is the heavy-duty answer to contamination that everyday cleaning products cannot remove. Its highly concentrated alkaline formula is purpose-built to break down oil, grease, fuel, diesel, and algae — the stubborn organic residues that build up on engines, transmissions, mechanical equipment, marine hulls, and commercial kitchen surfaces over time. Where other cleaners stall and require repeated applications or harsh scrubbing, Hecta continues to perform, setting new standards in environmentally responsible cleaning productivity. Despite its strength, Hecta is biodegradable to OECD standards, phosphate-free, and solvent-free — a formula that delivers genuinely industrial-grade results without the environmental trade-offs of traditional alkaline degreasers.
Beyond its standalone cleaning power, Hecta plays an important supporting role in Permanon's broader approach to surface hygiene. Independent research into Permanon's Si14 nano surface coatings — including studies showing reduced viability of bacteria such as E. coli and S. aureus, and reduced bacterial adherence on stainless steel, polycarbonate, and glass — consistently emphasises that effective surface sealing depends on starting with a genuinely clean, contamination-free surface. Organic residue, oils, and biofilm-supporting grime can interfere with how well a sealant bonds and performs. By thoroughly degreasing and decontaminating a surface first, Hecta ensures that a follow-up application of Permanon Sanides, Silver Line, or another surface sealant can form the hydrophobic, germ-resistant barrier these studies examined — making Hecta the foundational first step for any business or household serious about long-term surface hygiene and protection.
Australia and New Zealand Distribution and Trade Pricing
Permanon Hecta is available now across Australia and New Zealand through Permanon Australia. Trade pricing is available for marine operators, automotive and fleet workshops, commercial kitchens, hospitality businesses, facility managers, and trade partners.
Contact the Permanon Australia team to discuss trade accounts, volume pricing, and product support. Get in Touch Now!
30-day return is to be approved or changed into "return policies"
Safety Data Sheet